BIX Cross Connect System Distribution 2

Publicado en enero 15, 2015 por Eduardo Calderon — Sin Comentarios ↓

A0266828, A0393146, A0269923, A0266827, A0269925, AX100798, A0341173, A0330864, A0330863

Contactenos en: www.innovative.com.mx Tel: (664) 621 33 36 / 621 30 09 ventas@innovative.com.mx,
soporte@innovative.com.mx, Innovative Trade Center Tijuana, B. C. Distribuimos en toda la republica.

BIX Cross Connect System Distribution 2

BIX Cross-Connect System
Distribution Connectors, Multiplying Connectors
and Modular Jack Connectors

BIX Distribution Connector
The BIX Distribution Connector is a 25-pair connector. The connector’s symmetrical construction
allows termination of cables on one side and cross-connect jumper wires or BIX Patch Cords on the
other. Each BIX connector is equipped with 50 double-ended Insulation Displacement Connection (IDC)
clips for terminating plastic insulated solid copper conductors without stripping and pair splitters on
each side of the connector facilitate wire insertion.
BIX Multiplying Connector
BIX Multiplying Connectors are used to generate multiple outputs from a single input. Construction of
these connectors is identical to that of BIX Distribution Connectors, except for the IDC clips which are
bridged. BIX Multiplying Connectors are typically used in voice applications.
The QCBIX2A Connector is built using 24 sets of bridged clips (2 clips each). It is used to terminate
various facilities where multiples of 2 are required.
The QCBIX5A Connector is built using 10 sets of bridged clips (5 clips each). It is used for multiple
jumper connections to the same equipment.
The QCBIX7A Connector is built using 10 sets of bridged clips (four 2-clip and six 7-clip bridged
arrangements). It is primarily intended for use with 1A type key telephone systems. Each connector
can terminate up to three lines of key equipment providing service to as many as seven key telephone
sets per line.
BIX Modular Jack Connector
BIX Modular Jack Connectors provide a fast and flexible method to manage small-to-medium crossconnect
installations. These connectors are built with a BIX connector pre-wired to standard modular
jacks. They allow front-access termination and patching.
The NXXCBMC6U Connector is a 6-port, 8-position modular connector used for data applications.
It exceeds all Category 5e channel requirements when used with PS5E Modular Cords in a
Belden IBDN 1200 System.
QCBIX36-type Connectors are used mostly for voice applications. The QCBIX36D connector is a
6-port, 8-position modular connector. It is pre-wired to USOC 8-wire wiring scheme specifications.
The QCBIX36C connector is an 8-port, 6-position modular connector. It is pre-wired to USOC 6-wire
wiring scheme specifications. The QCBIX36B connector is a 12-port, 6-position modular connector.
It is pre-wired to USOC 4-wire wiring scheme specifications.
Numero de Parte Belden: A0266828, A0393146, A0269923, A0266827, A0269925, AX100798, A0341173, A0330864, A0330863

Tijuana, Tecate, Mexicali, Rosarito, Ensenada, San Luis Rio Colorado, La Paz, Los Cabos

Etiquetado con: 10gx, 110, belden, bix, bonded, Cable, cable management, cableado estructurado, cat 6, category 3, category 5e, Connect, cordon de parcheo, Cross, cross connect, data, datatwist, Distribution 2, gigabix, gigaflex, ibdn, ieee 802.3, jack, lan, modular cord, multipair, outlet, patch panel, pigtail, plug, stp, structured cabling, System, tia/eia 568, tia/eia 568 a, utp, voice, voip, workstation outlet
Publicado en: Belden

GigaBIX Multi System

Publicado en enero 15, 2015 por Eduardo Calderon — Sin Comentarios ↓

GigaBIX Multi System

AX102073, AX102082, AX102145

Contactenos en: www.innovative.com.mx Tel: (664) 621 33 36 / 621 30 09 ventas@innovative.com.mx,
soporte@innovative.com.mx, Innovative Trade Center Tijuana, B. C. Distribuimos en toda la republica.

GigaBIX Multi System

GigaBIX Multi System
Cable Management Accessories

GigaBIX Distribution Frame & Accessories
GigaBIX Distribution Frames provide a compact mounting unit for large cross-connect installations of
data or voice services.
The GigaBIX Distribution Frame can accommodate up to (16) 12-connector GigaBIX Mounts, eight on
the equipment side and eight on the distribution side. The GigaBIX Distribution Frame has a capacity of
1152 ports or 4800 pairs. It is backwards compatible with BIX Mounts (QMBIX12E) and can be used to
continue a row of BIX Distribution Frames (QFBIX24E).
The GigaBIX Frame End Kit consists of eight (8) cable trays and eight (8) distribution rings plus
appropriate mounting hardware. One kit is required to support GigaBIX Cross-Connect Wires on the
sides of a single-frame installation or on the end frames of a multi-frame installation.
The GigaBIX Overhead Kit consists of two (2) metal bars and four (4) “J” bolts plus appropriate mounting
hardware to support cable ladder (not included) running over a row of GigaBIX Distribution Frames.

Numero de Parte Belden: AX102073, AX102082, AX102145

Tijuana, Tecate, Mexicali, Rosarito, Ensenada, San Luis Rio Colorado, La Paz, Los Cabos

Etiquetado con: 10gx, 110, belden, bix, bonded, Cable, cable management, cableado estructurado, cat 6, category 3, category 5e, cordon de parcheo, cross connect, data, datatwist, gigabix, gigaflex, ibdn, ieee 802.3, jack, lan, modular cord, Multi, multipair, outlet, patch panel, pigtail, plug, stp, structured cabling, System, tia/eia 568, tia/eia 568 a, utp, voice, voip, workstation outlet
Publicado en: Belden

GigaBIX Multi System Cable

Publicado en enero 15, 2015 por Eduardo Calderon — Sin Comentarios ↓

GigaBIX Multi System Cable

AX102146, AX102147, AX102148, AX102149, AX102150, AX102151, AX102152, AX102153, AX102154, AX102155, AX102156, AX101469, AX101468, AX101521, AX101520, AX101478

Contactenos en: www.innovative.com.mx Tel: (664) 621 33 36 / 621 30 09 ventas@innovative.com.mx,
soporte@innovative.com.mx, Innovative Trade Center Tijuana, B. C. Distribuimos en toda la republica.

GigaBIX Multi System Cable

GigaBIX Multi System
Cable Management Accessories

GigaBIX Colored Service Clips
The GigaBIX Colored Service Clip is a single-pair plastic clip that snaps on the GigaBIX connectors
to visually identify various services when using GigaBIX Cross-Connect Wire.
GigaBIX Cable Management Module
The GigaBIX Cable Management Module is designed to be used with a wall mount solution. The
accessory allows all terminated cables to be brought from the same side (top or bottom) in a high-density
GigaBIX installation (4-mount stack). The modules are stackable side-to-side and top-to-bottom with
alignment features to ease installation. The modules can be used horizontally to create a horizontal
management channel for more flexibility in a side-to-side patching layout using GigaBIX Patch Cords.
GigaBIX Patch Cord Organizer
The GigaBIX Patch Cord Organizer is designed to be used with a wall mount solution. The Patch Cord
Organizer is a metal trough that interlocks with GigaBIX Mounts to create a vertical management channel
for GigaBIX Patch Cords. The Patch Cord Organizer has six (6) openings per side to nicely dress the
patch cords while clearing the labeling area on the GigaBIX Mount. The organizer can be assembled
over Cable Management Modules in large patch cord installations. A Patch Cord Organizer Cover can
be purchased separately to hide the patch cords and give a very professional and high-tech look to the
installation.
GigaBIX Horizontal Channel Plate
GigaBIX Horizontal Channel Plates are metal plates that attach to the Patch Cord Organizers to
create a horizontal management channel for GigaBIX Patch Cords. The plates are used in pairs and
are designed to keep patch cords inside the horizontal channel.
GigaBIX Management Ring
The GigaBIX Management Ring is a plastic ring that interlocks with the GigaBIX Mounts to create
a high-density wall mount cross-connect system. The rings are assembled in systems when using
cross-connect wire and have a capacity of 450 GigaBIX Cross-Connect Wires (1800-pairs total).
Numero de Parte Belden: AX102146, AX102147, AX102148, AX102149, AX102150, AX102151, AX102152, AX102153, AX102154, AX102155, AX102156, AX101469, AX101468, AX101521, AX101520, AX101478

GigaBIX Multi System Patch

Publicado en enero 15, 2015 por Eduardo Calderon — Sin Comentarios ↓

GigaBIX Multi System Patch

AX101945, AX101951, AX101957, AX101946, AX101952, AX101958, AX101947, AX101953, AX101959, AX101948, AX101954, AX101960, AX101949, AX101955, AX101961, AX101950, AX101956, AX101962, AX101963, AX101969, AX101975, AX101964, AX101970, AX101976, AX101965, AX101971, AX101977, AX101966, AX101972, AX101978, AX101967, AX101973, AX101979, AX101968, AX101974, AX101980, 24570521, 24577B15

Contactenos en: www.innovative.com.mx Tel: (664) 621 33 36 / 621 30 09 ventas@innovative.com.mx,
soporte@innovative.com.mx, Innovative Trade Center Tijuana, B. C. Distribuimos en toda la republica.

GigaBIX Multi System Patch

GigaBIX Multi System
Patch Cords and Cross-Connect Wire

GigaBIX Patch Cords
GigaBIX Patch Cords allow for high-density connections, coupled with flexibility for cost-effective
installation and administration. Plug-and-go installation and rearrangement of patch cords do not
require any special tools or training. GigaBIX Patch Cords are available in two different configurations:
BIX-BIX patch cord configurations for easy cross-connection between equipment and distribution fields,
and BIX-8MOD patch cord configurations to easily interconnect equipment utilizing 8-position modular
jacks directly into GigaBIX Connectors in the distribution field.
The GigaBIX PS6+ Patch Cords are 4-pair 23 AWG UTP cords. They are used in GigaBIX Multi System
as part of a Belden IBDN System 2400 and System 4800LX, providing a channel bandwidth of 250 MHz
and 300 MHz respectively.
The GigaBIX PS5E Patch Cords are used in the GigaBIX Multi System as part of a Belden IBDN System
1200, providing outstanding channel bandwidth of 160 MHz.

Numero de Parte Belden: AX101945, AX101951, AX101957, AX101946, AX101952, AX101958, AX101947, AX101953, AX101959, AX101948, AX101954, AX101960, AX101949, AX101955, AX101961, AX101950, AX101956, AX101962, AX101963, AX101969, AX101975, AX101964, AX101970, AX101976, AX101965, AX101971, AX101977, AX101966, AX101972, AX101978, AX101967, AX101973, AX101979, AX101968, AX101974, AX101980, 24570521, 24577B15

Tijuana, Tecate, Mexicali, Rosarito, Ensenada, San Luis Rio Colorado, La Paz, Los Cabos

Etiquetado con: 10gx, 110, belden, bix, bonded, Cable, cable management, cableado estructurado, cat 6, category 3, category 5e, cordon de parcheo, cross connect, data, datatwist, gigabix, gigaflex, ibdn, ieee 802.3, jack, lan, modular cord, Multi, multipair, outlet, Patch, patch panel, pigtail, plug, stp, structured cabling, System, tia/eia 568, tia/eia 568 a, utp, voice, voip, workstation outlet
Publicado en: Belden

GigaBIX Multi System Termination

Publicado en enero 15, 2015 por Eduardo Calderon — Sin Comentarios ↓

GigaBIX Multi System Termination

AX101470, AX101471, AX101985, AX101447, AX101448, AX101472, AX101986, AX101486, AX101483, AX101987

Contactenos en: www.innovative.com.mx Tel: (664) 621 33 36 / 621 30 09 ventas@innovative.com.mx,
soporte@innovative.com.mx, Innovative Trade Center Tijuana, B. C. Distribuimos en toda la republica.

GigaBIX Multi System Termination

GigaBIX Multi System
Termination Kits and Basic Components

GigaBIX Termination Kits
The GigaBIX Termination Kits contains all components required to terminate cables in a GigaBIX
Cross-Connect or Interconnect System. The Termination Kits allow for the most cost-effective Category 6
cross-connect or interconnect installations using GigaBIX Cross-Connect Wire or GigaBIX PS6+ Patch
Cords. The GigaBIX Mount is designed to accommodate high-performance cables. The GigaBIX
Connectors have color-coded edges, separation marks and a keying feature that prevents connector
insertion in the wrong orientation. Each kit also contains Wire Guards, Designation Strips, Designation
Labels, Velcro ties and a detailed installation guide.
GigaBIX Connector
The GigaBIX Connector is the core component of the GigaBIX Multi System. Its symmetrical
construction allows termination of high-performance cables on one side and GigaBIX Cross-Connect
Wires or GigaBIX Patch Cords on the other. Each GigaBIX Connector is equipped with 50 double-ended
Insulation Displacement Connection (IDC) clips for terminating plastic insulated solid copper conductors
without stripping. The connector is built with two staggered rows of IDC clips enclosed in a three-layer
construction of fire-retardant plastic wafers. The GigaBIX Connectors have color-coded edges, separation
marks and a keying feature that prevents connector insertion in the wrong orientation. The GigaBIX
Connector offers exceptional performance that goes Beyond Category 6 which makes it the ideal choice
for gigabit cabling networks.
GigaBIX Mount
The GigaBIX Mount for wall installations holds 12 GigaBIX Connectors and is designed to accommodate
up to 144 high-performance cables when used in a top-to-bottom cross-connect layout.
The GigaBIX Rack Mount Panel allows for customizing rack mount installations for data, voice or multimedia
installations. This panel can accommodate up to 8 GigaBIX Connectors, for a total of 48 terminations of 4-pair
UTP cables, or up to 4 GigaBIX/MediaFlex Adapters for a total of 48 multimedia ports.
GigaBIX Wire Guard
The GigaBIX Wire Guards are plastic strips that snap behind the GigaBIX Connectors after termination
to provide strain relief to the twisted pairs. They come as part of the GigaBIX Termination Kits and can
also be ordered separately as replacement components.
GigaBIX Designation Strip
The GigaBIX Designation Strips are plastic strips that snap between the GigaBIX Connectors to apply
the designation labels. They come as part of the GigaBIX Termination Kits and can also be ordered
separately as replacement components. (See the LabelFlex section for designation labels.)
GigaBIX/MediaFlex Adapter
The GigaBIX/MediaFlex Adapter allows for mixed media installation within the expanded GigaBIX Multi
family of connectivity. The GigaBIX/MediaFlex Adapter can accommodate a variety of MediaFlex inserts
including UTP and multimedia inserts to customize multimedia installation in Telecommunications
Rooms, Equipment Rooms, or Consolidation Points.

Numero de Parte Belden: AX101470, AX101471, AX101985, AX101447, AX101448, AX101472, AX101986, AX101486, AX101483, AX101987

Tijuana, Tecate, Mexicali, Rosarito, Ensenada, San Luis Rio Colorado, La Paz, Los Cabos

Etiquetado con: 10gx, 110, belden, bix, bonded, Cable, cable management, cableado estructurado, cat 6, category 3, category 5e, cordon de parcheo, cross connect, data, datatwist, gigabix, gigaflex, ibdn, ieee 802.3, jack, lan, modular cord, Multi, multipair, outlet, patch panel, pigtail, plug, stp, structured cabling, System, Termination, tia/eia 568, tia/eia 568 a, utp, voice, voip, workstation outlet
Publicado en: Belden

Belden IBDN System 10GX

Publicado en enero 15, 2015 por Eduardo Calderon — Sin Comentarios ↓

Belden IBDN System 10GX

24826395, 24826995, 24827395, 24827995, 24828095, 24822395, 24816395, 24816995, 24817395, 24817995, 24818095, 24812395

Contactenos en: www.innovative.com.mx Tel: (664) 621 33 36 / 621 30 09 ventas@innovative.com.mx,
soporte@innovative.com.mx, Innovative Trade Center Tijuana, B. C. Distribuimos en toda la republica.

Belden IBDN System 10GX

Belden IBDN System 10GX
10GX Cables

10GX Cable
The 10GX Cables are 4-pair 23 AWG UTP cables designed to be used within the Belden IBDN System
10GX. The GX Cable incorporates the use of patent-pending SpiralFleX™ technology, which improves the
ANEXT coupling by increasing and randomizing the distance between a cable and the neighboring cables
surrounding it. The unmatched Beyond 10G™ performance exceeds all parameters specified in the proposed
Augmented Category 6 standard. All performance characteristics including ANEXT, NEXT, FEXT,
Insertion Loss and Return Loss have been set to guarantee channel transmission performance up to 625
MHz. The 10GX Cable Series is very complete with cable available with Bonded-Pairs and Nonbondedpairs,
and is available in plenum, non-plenum, and Limited Combustible versions.
Numero de Parte Belden: 24826395, 24826995, 24827395, 24827995, 24828095, 24822395, 24816395, 24816995, 24817395, 24817995, 24818095, 24812395

Tijuana, Tecate, Mexicali, Rosarito, Ensenada, San Luis Rio Colorado, La Paz, Los Cabos

Etiquetado con: 10gx, 110, belden, bix, bonded, Cable, cable management, cableado estructurado, cat 6, category 3, category 5e, cordon de parcheo, cross connect, data, datatwist, gigabix, gigaflex, ibdn, ieee 802.3, jack, lan, modular cord, multipair, outlet, patch panel, pigtail, plug, stp, structured cabling, System, tia/eia 568, tia/eia 568 a, utp, voice, voip, workstation outlet
Publicado en: Belden

Belden IBDN System 10GX

Publicado en enero 15, 2015 por Eduardo Calderon — Sin Comentarios ↓

Belden IBDN System 10GX

AX360015, AX360051, AX360027, AX360021, AX360045, AX360057, AX360016, AX360052, AX360028, AX360022, AX360046, AX360058, AX360017, AX360053, AX360029, AX360023, AX360047, AX360059, AX360018, AX360054, AX360030, AX360024, AX360048, AX360060, AX360265, AX360266, AX360267, AX360268, AX360269, AX360270, AX360271, AX360272

Contactenos en: www.innovative.com.mx Tel: (664) 621 33 36 / 621 30 09 ventas@innovative.com.mx,
soporte@innovative.com.mx, Innovative Trade Center Tijuana, B. C. Distribuimos en toda la republica.

Belden IBDN System 10GX

OEM

Se denomina fabricante de equipos originales (en inglés: Original Equipment Manufacturer, siglas: OEM, literalmente «fabricante de equipamiento original») a la empresa que manufactura productos que luego son comprados por otra y vendidos al por menor bajo la marca de la empresa compradora (a veces conocida como empresa reenvasadora). Las siglas OEM comúnmente hacen referencia a la empresa fabricante del producto original.

También se puede aplicar a todo el proceso de subcontratación de la fabricación de los productos de una empresa. Se da cada vez más en las grandes multinacionales que dejan de producir ellas mismas sus equipos o bienes y los encargan a terceros. Estos los fabrican con los colores, formas, logos, etc. específicos de cada compañía, con lo que el cliente final siempre verá un producto de la marca que está comprando, como si lo hubiera fabricado ella misma.

Las empresas OEM pueden incluso fabricar el mismo producto para diferentes marcas, e incluso competencia, creando el mismo de manera personalizada. Es un fenómeno cada vez más extendido en todos los ámbitos de la producción, sobre todo en equipos industriales, textiles, informáticos, automóviles, etcétera.

Belden IBDN System 10GX
10GX Modular Cords

10GX Modular Cords
The 10GX Modular Cords are 4-pair 23 AWG UTP modular cords designed to be used within the Belden
IBDN System 10GX. Belden has designed the 10GX Modular Cord based on a patent-pending management
bar design which allows for very good control of the internal plug NEXT. The patch cable design offers
very good Alien crosstalk performance, while maintaining the important mechanical characteristics such
as flexibility. The 10GX Modular Cords’ design, with a very small footprint, makes them fully compatible
with the highest density hubs that utilize RJ45 jack connections. The 10GX Modular Cords are available
in pantone colors that match the colors per the TIA/EIA-606 standard and the product line encompasses
CMR modular cords, as well as open-ended cords. The unmatched performance exceeds all parameters
specified in the proposed Augmented Category 6 standard. All performance characteristics have been
set to guarantee transmission performance up to 625 MHz.

Numero de Parte Belden: AX360015, AX360051, AX360027, AX360021, AX360045, AX360057, AX360016, AX360052, AX360028, AX360022, AX360046, AX360058, AX360017, AX360053, AX360029, AX360023, AX360047, AX360059, AX360018, AX360054, AX360030, AX360024, AX360048, AX360060, AX360265, AX360266, AX360267, AX360268, AX360269, AX360270, AX360271, AX360272

Tijuana, Tecate, Mexicali, Rosarito, Ensenada, San Luis Rio Colorado, La Paz, Los Cabos

Etiquetado con: 10gx, 110, belden, bix, bonded, Cable, cable management, cableado estructurado, cat 6, category 3, category 5e, cordon de parcheo, cross connect, data, datatwist, gigabix, gigaflex, ibdn, ieee 802.3, jack, lan, modular cord, multipair, outlet, patch panel, pigtail, plug, stp, structured cabling, System, tia/eia 568, tia/eia 568 a, utp, voice, voip, workstation outlet
Publicado en: Belden

Belden IBDN System 10GX Modules

Publicado en enero 15, 2015 por Eduardo Calderon — Sin Comentarios ↓

Belden IBDN System 10GX Modules

AX102269, AX102271, AX102272, AX102274, AX102275, AX102276, AX102277, AX102562, AX102488, AX102293, AX102296

Contactenos en: www.innovative.com.mx Tel: (664) 621 33 36 / 621 30 09 ventas@innovative.com.mx,
soporte@innovative.com.mx, Innovative Trade Center Tijuana, B. C. Distribuimos en toda la republica.

Belden IBDN System 10GX Modules

MRO

El concepto de Mantenimiento, Reparación y Operaciones o simplemente MRO, abarca todo el material indirecto relacionado directamente con el producto y los servicios que son vitales para el funcionamiento continuo de la producción en la industria. Todo lo que no es materia prima y, por lo tanto, no será parte del producto final, cae en esta clasificación.

Mantenimiento: Estos son elementos necesarios para «mantener» la planta o unidad en perfecto funcionamiento prductivo.

Reparaciones: Donde hablaríamos de equipos y suministros necesarios para reparar la maquinaria de la planta cuando una máquina se avería y queda fuera de servicio, o cuando tiene programada una tarea para el mantenimiento rutinario.

Operaciones: Incluyendo elementos tales como Personal protective equipment(PPE) – equipos de protección individual (EPI), herramientas de corte, así como el resto de elementos necesarios para operar la planta productiva de manera eficiente.

Belden IBDN System 10GX
10GX Modules and 10GX Patch Panels

10GX Module
The 10GX Module is a revolutionary punch down UTP connector designed to be used within the new
Belden IBDN System 10GX. In order to achieve true 10G performance, Belden has designed the 10GX
Module based on three revolutionary module technologies making the 10GX Module the most advanced
10G module available. It is designed to work in existing hardware including the Flex Modular Patch
Panel and MediaFlex Outlet Series. It can also be mixed and matched with a wide variety of adapters
and boxes to suit practically any installation configuration for workstation outlet, consolidation point
and telecommunications closet applications. The unmatched Beyond 10G™ performance exceeds all
parameters specified in the proposed Augmented Category 6 standard. All performance characteristics
including ANEXT, NEXT, FEXT, Insertion Loss and Return Loss have been set to guarantee transmission
performance up to 625 MHz.

Numero de Parte Belden: AX102269, AX102271, AX102272, AX102274, AX102275, AX102276, AX102277, AX102562, AX102488, AX102293, AX102296

Tijuana, Tecate, Mexicali, Rosarito, Ensenada, San Luis Rio Colorado, La Paz, Los Cabos

Etiquetado con: 10gx, 110, belden, bix, bonded, Cable, cable management, cableado estructurado, cat 6, category 3, category 5e, cordon de parcheo, cross connect, data, datatwist, gigabix, gigaflex, ibdn, ieee 802.3, jack, lan, modular cord, Modules, multipair, outlet, patch panel, pigtail, plug, stp, structured cabling, System, tia/eia 568, tia/eia 568 a, utp, voice, voip, workstation outlet
Publicado en: Belden

Power Over Ethernet

Publicado en enero 15, 2015 por Eduardo Calderon — Sin Comentarios ↓

Power Over Ethernet

AX-8858-01, AX-8858-02, AX-820Y-01, AX-820Y-02, AX-820Y-03, AX-820Y-04, AX-820Y-05, AX-820Y-06, AX-820Y-07, AX-820Y-08, AX-820Y-09, AX-820Y-10

Contactenos en: www.innovative.com.mx Tel: (664) 621 33 36 / 621 30 09 ventas@innovative.com.mx,
soporte@innovative.com.mx, Innovative Trade Center Tijuana, B. C. Distribuimos en toda la republica.

Power Over Ethernet

OEM

Power Over Ethernet Accessories
PoE Connectors, Data & Power Splitting “Y” Cables

Power over Ethernet Connectors
Power over Ethernet Connectors allow Cisco 7900 Series VoIP Phones or AP350 or AP1100
to be powered with IEEE 802.3af style 48-volt power over Ethernet.
Power may come from a powered Ethernet switch or midspan power hub. Connector installs
near powered device. Two LEDs let user know whether power is originating from an Ethernet
switch or midspan power hub.

Numero de Parte Belden: AX-8858-01, AX-8858-02, AX-820Y-01, AX-820Y-02, AX-820Y-03, AX-820Y-04, AX-820Y-05, AX-820Y-06, AX-820Y-07, AX-820Y-08, AX-820Y-09, AX-820Y-10

Tijuana, Tecate, Mexicali, Rosarito, Ensenada, San Luis Rio Colorado, La Paz, Los Cabos

Etiquetado con: access point, belden, Cable, Ethernet, hub, ip, lan, network, networking, Over, Poe, power, power over Ethernet, powersense, security camera, wireless
Publicado en: Belden

Power Over Ethernet Midspan

Publicado en enero 15, 2015 por Eduardo Calderon — Sin Comentarios ↓

Power Over Ethernet Midspan

AX-6224, AX-6208, AX-6108, AX-6108-RM, AX-6524, AX-6516, AX-6508, AX-6524GIG, AX-6516GIG, AX-6508GIG, AX-6512HW4, AX-6508HW4, AX-6504HW4, AX-6500, AX-6500GIG, AX-6500HW4, AX-6201

Contactenos en: www.innovative.com.mx Tel: (664) 621 33 36 / 621 30 09 ventas@innovative.com.mx,
soporte@innovative.com.mx, Innovative Trade Center Tijuana, B. C. Distribuimos en toda la republica.

Power Over Ethernet Midspan

Power Over Ethernet Midspan Hubs
PowerSense AX-6000 Series
24-Port, 8-Port Module

AX-6000 PowerSense Series 24-Port
The AX-6000 Modular Multiport In-Line Power Hub safely and efficiently provides power over
LAN data cabling for VolP phones, wireless networking access points, IP security cameras and
other remote network devices.
The PowerSense In-Line Power Hub provides power to LAN devices without the use of an external
power supply for each device. Power is supplied over the existing LAN data cabling system. This
greatly increases the flexibility of installation and possible locations for such devices, no longer
requiring them to be located near a power outlet. It also adds an unprecedented level of safety and
reliability for powered LAN devices.
The PowerSense Hub is a 24-port rack-mount chassis powering up to 24 devices. Each 8-port module
is hot-swappable and modules may be added to the chassis without powering down the unit. If an
individual power port is damaged due to a lightning strike or power surge, the module bank may be
hot swapped out without powering down the chassis or disconnecting the other devices attached to
the other power ports in the chassis.
When used with an uninterruptible power supply, the PowerSense Hub provides continuous power
for up to 24 connected devices. PowerSense is tough and durable, made with an all metal chassis.
PowerSense operates on Category 5, 5e or 6 grade LAN data cable at standard Ethernet distances.
The AX-6000 series supports powered devices requiring the IEEE 802.3af PoE protocol.

Numero de Parte Belden:AX-6224, AX-6208, AX-6108, AX-6108-RM, AX-6524, AX-6516, AX-6508, AX-6524GIG, AX-6516GIG, AX-6508GIG, AX-6512HW4, AX-6508HW4, AX-6504HW4, AX-6500, AX-6500GIG, AX-6500HW4, AX-6201

Tijuana, Tecate, Mexicali, Rosarito, Ensenada, San Luis Rio Colorado, La Paz, Los Cabos